Touch TFT Module GT-CP series

Recommended applications

- Food-processing
- Bio & laboratory
- Manufacturing equipment etc...
Powerful command set allows a small controller to manipulate the display. It also has high noise immunity and water and glove compatibility.
Features Lineup Contact Us

Features


Easy simple Display Control
Character Code and Display Command Control

Send character code like ASCII and UTF-8 to display text on screen. Send a display image command to display an image from flash memory. Memory writing tools are available free of charge.

Display Text Message

Display Text Message

Display Image in Flash Memory

Display Image in Flash Memory

Reduce the Load of the Host
Three(3) Touch Modes

Touch panel sends a packet to the host controller when a touch is detected. The packet can report internally calculated coordinates or switch number. The switch number can be defined two ways.

Coordinate
Mode

Matrix Switch
Mode

Custom Switch
Mode

Coordinate Mode
Report X-Y coordinates of the touched location.
Matrix Switch Mode
Report X-Y matrix number in switch array.
Custom Switch Mode
Report a switch number out of defined rectangles.

Useful Functions

Built in Fonts

GT-CP comes standard with both bitmap and outline fonts, along with font tables that include the English, Japanese, Chinese, and Korean languages. You can also register your own font.

26 General I/O Ports

Macro programs are also capable of controlling the module’s 26 general I/O ports. These ports can be used to control other peripheral devices.

Program Macro Execution

Macro programs can be developed and saved onto the module and used without an external controller. These programs can also be set to execute upon system start-up.
feature_pmacro.jpg(18235 byte)

Auto Calibration

The touch sensitivity is automatically adjusted to the surrounding environment.

Gloved Touch is Possible
Wide Touch Tolerance

Higher sensitivity than ordinate touch panels (like ITO) and offers thicker cover glass and compatibility with a variety of gloves.

Comparison of Touch Sensitivity


feature_glove.jpg(66452 byte)

Wet Touch Possible
Strong and Stable Touch Signal

With a stable touch sensing signal, touch detection is possible by locating the signal's peak point.

Touch Signal of Water drops

feature_water1.jpg(19985 byte)

Touch Signal under Water Film

feature_water2.jpg(32628 byte)

Block Diagram

Block Diagram

Lineup


Part Number
Photo
Display
Resolution
Display Size PCB Size Power
Interface Font Note
GTWQ043C3A00PA
4.3 inch NEW


Simplified Datasheet DL
480 x 272
pixels
95.04 x
53.86 mm
108.0 x 80.0 mm 5V
USB
(High & Full speed)
UART
(CMOS 3.3V)
SPI
(CMOS 3.3V)
I2C
(CMOS 3.3V)
ANK/INT
6x8, 8x16,
12x24, 16x32,
Outline font
CHN/KOR
16x16,
Outline font
JPN
16x16, 32x32,
Outline font
-
GT480X272A-C903PA
4.3 inch
*1


Simplified Datasheet DL
480 x 272
pixels
95.04 x
53.856 mm
108.0 x 80.0 mm 5V
USB
(High & Full speed)
UART
(CMOS 3.3V)
SPI
(CMOS 3.3V)
I2C
(CMOS 3.3V)
ANK/INT
6x8, 8x16,
12x24, 16x32,
Outline font
CHN/KOR
16x16,
Outline font
JPN
16x16, 32x32,
Outline font
-
GTWV050C3A00PA
5 inch


Simplified Datasheet DL
800 x 480
pixels
108.0 x
64.8 mm
120.7 x 88.6 mm 5V
USB
(High & Full speed)
UART
(CMOS 3.3V)
SPI
(CMOS 3.3V)
I2C
(CMOS 3.3V)
ANK/INT
6x8, 8x16,
12x24, 16x32,
Outline font
CHN/KOR
16x16,
Outline font
JPN
16x16, 32x32,
Outline font
-
GTWV070C3A00PA
7 inch NEW


Simplified Datasheet DL
800 x 480
pixels
154.08 x
85.92 mm
165.0 x 118.5 mm 5V
USB
(High & Full speed)
UART
(CMOS 3.3V)
SPI
(CMOS 3.3V)
I2C
(CMOS 3.3V)
ANK/INT
6x8, 8x16,
12x24, 16x32,
Outline font
CHN/KOR
16x16,
Outline font
JPN
16x16, 32x32,
Outline font
-
GT800X480A-C903PA
7 inch
*1


Simplified Datasheet DL
800 x 480
pixels
154.08 x
85.92 mm
165.0 x 118.5 mm 5V
USB
(High & Full speed)
UART
(CMOS 3.3V)
SPI
(CMOS 3.3V)
I2C
(CMOS 3.3V)
ANK/INT
6x8, 8x16,
12x24, 16x32,
Outline font
CHN/KOR
16x16,
Outline font
JPN
16x16, 32x32,
Outline font
-
GTWV070C3A01PA
7 inch RS-232 model


Simplified Datasheet DL
800 x 480
pixels
154.08 x
85.92 mm
165.0 x 118.5 mm 5V
USB
(High & Full speed)
RS-232
ANK/INT
6x8, 8x16,
12x24, 16x32,
Outline font
CHN/KOR
16x16,
Outline font
JPN
16x16, 32x32,
Outline font
Part Number
Photo
Display
Resolution
Display Size PCB Size Power
Interface Font Note

*1: This item will be replaced by a successor item.
   If you are considering a new project, please select a new item.


This website uses cookies. Cookies help to provide you with the best web functionality and us with better web analytics. To do that, cookies may send your usage and content preference information to us. But, we do not disclose any of this info to any third party websites or organizations, we manage it under our Privacy Policy. By continuing to browse our website, you agree to our privacy policy.
OK